Fuel Instruments & Engineers Pvt. Ltd.
Home
About Us Product contact Enquiry Site Map Product Gallery
  Electro-Mechanical Universal Testing Machines UNITEK 9700 Series
 
 
 

Electro-Mechanical Universal Testing Machines UNITEK 9700 Series

   
ELECTRO-MECHANICAL UNIVERSAL TESTING MACHINES UNITEK 9700 SERIES
Electro Mechanical Universal Testing Machines
Get A quote
 
Technical Description :
   
 
FIE Universal Testing Series Unitek 9700 are microprocessor based Electromechanical machines with Servo drive designed for testing & Studying mechanical behavior of various materials like metals, polymers Etc. These machines offer good built-in features to offer excellent stand Alone performance for standard tests & great flexibility for complex Analysis. These machines confirm to IS, BS & ASTM standards.
   
Main Features
 
 
Servo drive with lead screw gives an gives an advanced drive system with 1 to 1000 standard speed range.
Computerised Microprocessor based Instrumentation to measure display & store load & Displacement values.
Provision for load cell interchangeability & thereby automatic selection of lad full scale.
Speed selection through selector switch in steps or variable speed selector through potentiometer.
Facility for mounting different load cells & clamping devices to suit different tests & materials such as thin wires, metalsheets, fiberglass, leathers, springs, cardboards etc.
Built in parallel interface to connect printer for data & curve print-out.
Safety interlock for overhead & limit switch sensing to ensure protection test.
Universal applications in R & D, education, quality control & production for test like tensile, compression, bending etc.
 
Electronic Control Panel (Series TNE – 9700) :
 
 
The electronic control panel is built using 8085 microprocessor which incorporates sate of the art technology with following features.
Front panel membrane type key board for test setup.
7 seg digital display of load & displacement / extension.
Printer port for printer / plotter interface.
Optional series port for communication with PC / AT etc.
Optional add on facility for electronic extensometer.
Storage on important parameters such as peak load, displacement at preload & maximum displacement after test.
Selection of test type like tension, compression, or cyclic by key board.
Preload selection ( 0.01 to 1 % ) by thumbwheel to take care of initial slippage.
Selection of stop or return crosshead after test.
 
Optional Accessories :
 
   
FIE offers a wide range of optional accessories along with unitek 9700 Machines to cover almost every material test requirement.
   
Loaded Cells
 
FIE offers Strain gauges type Universal load cells in different capacities in the following nominal ranges:
100N, 250N, 1kN, 1.2kN. Load cells of different capacity can be offered as per customers requirements.
 
   
Grip & Clamping Device
   
  A wide range of grips are available from FIE such as :
   
Vise type grips.
Single thread grips.
Compression Plates.
Bending Fixtures.
Shearing Attachments.
   
Extenso meters :
 
Electronic analog extensometers are offered along with interface card on the control panel to measure extension with a resolution of 1 micron.
 
 
Model : EE - STRAIN GAUGE
 
Serial Communication Interface & Software Package on PC/AT
   
 
For complex test analysis the Unitek 9700 series machines can be offered with and optional serial port to establish communication with PC. The TNE – 9700 series control panel can be hooked to any PC/AT etc., using RS-232 communication port which is offered as optional. FIE offers different exhaustive application software package on PC to enable the user to effectively different parameters.
   
  The features include :
   
User friendly main menu with popup/pulldown menus, prompt message & on line help.
Extensive graphics on screen for curve plotting, magnification & zooming.
Advanced fine handling for data save recall with database creation
Printout option for Reports, Data, Graph etc.
 
  The software package available are:
   
 
1) Basic Evaluation 2) Exhausitive Evaluation 3) Rubber Textile 4) Compression shear & bending. 5) Spring Testing.
Statistical Evaluation software can be offered for all these program as optional. FIE also can provide custom built software solution to suit customer requirement.
   
Specifications
   
 
Model No.
UNITEK 9701
UNITEK 97025
Units
Load range
0-1
0-2.5
kN
Load resolution
1 st range:
0 - 40% of F.S.
1 / 10000 of nominal load cell connected.
1 / 10000 of nominal load cell connected.
-
2 st range:
0 - 100% of F.S.
1 / 4000 of nominal load cell connected.
1 / 4000 of nominal load cell connected.
-
Load Measuring accuracy
+/-1% from 2% to 100% of nominal load of loadcell used.
+/- 1% from 2% to 100% of nominal load of loadcell used.
-
Max. Crosshead Stoke
800 ( Without grips & load cell )
800 ( Without grips & load cell )
mm
Crosshead Displacement measurement
0.1
0.1
mm
Crosshead speed range
0.5-500
0.5-500
mm/min
power upply
230 VAC, 50 Hz Single Phase
230 VAC, 50 Hz Single Phase
-
   
Special Options :
   
 
Load full scale of 20,000 or 50,000 counts
   
Crosshead displacement resolution of 0.01 mm.
   
Note :
   
  The power requirement of each model depends on the speed range and the capacity of the machine.
   
 
Due to constant R & D Specifications & Features are subject to change without notice.
 
 
 
Universal Testing Machines Mechanical Universal Testing Machines Electronic Universal Testing Machines

Other Product Range

Electro Mechanical Universal Testing Machines Unitek 9400  Electro Mechanical Universal Testing Machines Unitek 9700  Electro-Mechanical PC Control Universal Testing Machine  Compression Testing Machines Erichsen Testing Machines Laminated Spring Testing Machines Torsion Testing Machines Impact Testing Machines Rockwell Hardness Testing Machines Vickers Hardness Tester VM 50 Computerised Vickers Hardness Tester [Model : VM 50 PC]Computerised Brinell Image Analysis System [B.I.A.S] Computerised Fully Automatic Brinell Hardness Tester Model : B 3000-PC-FA Portable Brinell Hardness Tester SAROJ make Rockwell Hardness Testing Machine Brinell Hardness Tester Model B 3000 [O] Brinell Hardness Tester Model B 3000 [H] Dynamic Balancing Machine Model HDM   Dynamic Balancing Machine model HDCM   Dynamic Balancing Machine Model HDVM & HDVTM  Computerised MicrovickersHardness Tester (Model-MV-1 PC)
 
 
Designed by : MID   Hosted by : GID   Promoted by : PBD
Sitemap Contact Home